JVR rotary vacuum pump

rotary vacuum pump 2. Engine power: 1.5 Kw 3. Capacity: 65 m3/h 4. Ultimate vacuum:0.5mbar

Rotary vacuum pump

Direct-coupling single-stage type:

1. Rotary vane vacuum pumps with recirculating of grease.

2. Engine power: 1.5 Kw

3. Capacity: 65 m3/h

4. Ultimate vacuum:0.5mbar, working pressure range:8-10mbar

5. 200L SS vacuum buffer tank: 1NO

6. Pressure transmitter: 1NO,used to test pressure scope from 0 to 100mbar

7. Adjusting valve: 1NO, employed to adjust the capacity precisely

8. Small-size electrical cabinet: 1NO, applied to control the vacuum of the pump accurately and the starting of the pump.

9. All frames, necessary SS flanges and standard parts are included altogether.

Material for main parts:

a) Rotor: nodular C.I.

b) Vane: Teflon

c) Shaft extension sealing: imported shaft seal

d) End face seal: imported O-type ring

e) Other parts: great C.I.

Key traits:

a) In the inlet of vacuum pump is furnished with high-quality filter to keep dusts from going into pump chamber.

b) Inside the pump is installed with air suction valve to keep vane from reversing.

c) Vent valve is installed in the vent of vacuum pump to increase the vacuum of pump efficiently.

d) Oil mist eliminator is installed in the inside of vacuum pump to eliminate 99.99% oil mist.

Single-stage rotary vacuum pump

Model	A	B	C	D	E	F	G	H
X-40	650	150	330	195	270	220	300	280
X-63	650	150	325	295	285	270	430	295
X-100	720	180	350	295	285	270	430	295

 Technical Parameters

Item	Unit	X-40	X-63	X-100
Rated capacity	m3/h	40	63	100
Ultimate vacuum	mbar	0.1-0.5	0.1-0.5	0.1-0.5
Noise	dB(A)	64	65	66
Working temperature	°C	83	85	85
Oil   consumption	L	1	2	2
Allowable steam pressure	mbar	40	40	40
Steam removing rate	kg/h	0.6	1	1.6
Air inlet thread	inch	Rp11/4inch	Rp11/4	Rp11/4inch
Rate power for motor	kW	1.5	1.5	3
Rate rev for motor	rpm	1440	1440	1440
Weight	kg	48	58	72
External size	cm	65×30×28	65×43×29.5	72×43×29.5

C) Performance

1. Our pump has high ultimate vacuum, and its vacuum can be lower than 0.5mbar

2. High Pumping Speed

3. Lower working noise, below 66dB

4. Strong ability of ejecting steam

5. Our pumps can keep working even its inlet pressure is 1.33×103 pa

6. inside the pump is oil mist remover, 99.99% oil can be discharged.

7. Tight structure, scientific and reasonable design, light weight and easy to install.

8. Better quality, performance and after-sale services.